11N Wireless Broadband Router
selected.
MAC Address: Enter the MAC address you want to
run the access policy.
Times: Select the time range of client filter.
Days: Select the day(s) to run the access policy.
Apply： Click to make the settings go into effect.
For example:
if you want to configure the host with MAC address 00:C0:9F:
AD:FF:C5 not to access the Internet at 8：00-18：00, you need
to set it as above.
11.4 Prevent Network Attack
This section is to protect the internal network from exotic
attack such as SYN Flooding attack, Smurf attack, LAND
attack, etc. Once detecting the unknown attack, the Router
will restrict its bandwidth automatically.
The attacker’s IP address can be found from the “System
Log”.
Prevent Network Attack: Check to enable it for attack
prevention.
54
To Next Page
Loading...
Need help?
General
Weight and Dimensions
