11N Wireless Broadband Router
Fragment Threshold: The fragmentation threshold
defines the maximum transmission packet size in bytes.
The packet will be fragmented if the arrival is bigger
than the threshold setting. The default size is 2346
bytes. It is recommended not to modify this value.
RTS Threshold: RTS stands for “Request to Send”. This
parameter controls what size data packet the frequency
protocol issues to RTS packet. The default value of the
attribute is 2346. It is recommended not to modify this
value in SOHO environment.
TX Power: Set the output power of wireless radio. The
default value is 100.
WMM Capable: It will enhance the data transfer
performance of multimedia data when they’re being
transferred over wireless network. It is recommended to
enable this option.
APSD Capable: It is used for auto power-saved service.
The default is disabled.
6.4 WPS Settings
WPS (Wi-Fi Protected Setting) can be easy and quick to
establish the connection between the wireless network
clients and the device through encrypted contents. The users
only enter PIN code or press WLAN/WPA button on the panel
32