11N Wireless Broadband Router
to configure it without selecting encryption method and
secret keys by manual. In the “Wireless settings” menu, click
“WPS settings” to enter the next screen.
WPS settings：To enable or disable WPS function. The
default is “disable”.
WPS mode
： Provide two ways: PBC (Push-Button
Configuration) and PIN code.
PBC
：
Select the PBC or press the WLAN/WPS button on
the front panel of the device for about one second (Press
the button for about one second and WPS indicator will
be blinking for 2 minutes, which means the WPS is
enabled. During the blinking time, you can enable
another device to implement the WPS/PBC negotiation
between them. Two minutes later, the WPS indicator will
be off, which means the WPS connection is completed. If
33
To Next Page
Loading...
