11N Wireless Broadband Router
more clients are added, repeat the above steps. At
present, the WPS supports up to 32 clients access.)
PIN
： If this option is enabled, you need to enter a
wireless client’s PIN code in the field and keep the same
code in the WPS client.
WPS Summary ： Show the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
WPS Current Status
：Idle means WPS in idle state.
Start MSC process means the process has been started
and waits for being connected. Configured means the
negotiation is successful between server and clients.
WPS Configured
： “yes” means WPS feature is
enabled and goes into effect. “not used” means it is not
used. Usually the AP-security has been enabled, here
will displayed “not used”.
WPS SSID
Show the main SSID set by WPS. ：
WPS Auth. Mode
：The authorization mode deployed
by WPS, generally WPA/WPA2-personal mode.
WPS Encrypt Type
：The encryption type used by WPS,
generally AES/TKIP.
WPS key
： The effective key generated by AP
automatically.
AP PIN（KEY）
The PIN code used by default. ：
Reset OOB：When this button is pressed, the WPS client
will be idle state, and WPS indicator will be turned off. AP
will not respond the WPS client’s requests and the set
34
To Next Page
Loading...
