11N Wireless Broadband Router
MAC Address Filter ： Enable/disable MAC address
filter. Select “Close” to malfunction MAC address;
“disable” to prevent the MAC addresses in the list from
accessing the wireless network; “Allow” to allow the
MAC address in the list to access the wireless network.
MAC Address Management
：Input the MAC address
to implement the filter policy. Click “Add” to finish the
MAC add operation.
MAC list
：Show the added MAC addresses. You can add
or delete them.
6.7 Connection Status
This page shows wireless client’s connection status, including
MAC address, Channel bandwidth, etc. Select “Wireless
Setting->connection status” to enter the following screen:
MAC Address：Shows current MAC addresses of the
hosts connecting to the Router.
Bandwidth： Shows current bandwidth of the hosts
37
To Next Page
Loading...
