Tenda W268R User Manual

11N Wireless Broadband Router
 PBC ： Select the PBC or press the WLAN/WPS button on
the front panel of the device for about one second (Press
the button for about one second and WPS indicator will
be blinking for 2 minutes, which means the WPS is
enabled. During the blinking time, you can enable
another device to implement the WPS/PBC negotiation
between them. Two minutes later, the WPS indicator will
be off, which means the WPS connection is completed. If
more clients are added, repeat the above steps. At
present, the WPS supports up to 32 clients access.)
 PIN
： If this option is enabled, you need to enter a
wireless client’s PIN code in the field and keep the same
code in the WPS client.
 WPS Summary： Show the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
 WPS Current Status
：Idle means WPS in idle state.
Start MSC process means the process has been started
and waits for being connected. Configured means the
negotiation is successful between server and clients.
 WPS Configured
： “yes” means WPS feature is
enabled and goes into effect. “not used” means it is not
used. Usually the AP-security has been enabled, here
will displayed “not used”.
 WPS SSID
Show the main SSID set by WPS. ：
36

Tenda W268R Specifications

General

VPN support	PPPoE/PPTP/L2TP/802.1x
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	11 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	150 Mbit/s
Bandwidth	2.4 GHz
Rack mounting	-
xDSL connection	No
Power requirements	9V DC, 1A
Minimum system requirements	Internet Explorer 5.5, Firefox 1.0+ CD-ROM
Ethernet LAN (RJ-45) ports	4
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Transmit power	0 dBmW
Antenna gain level (max)	2 dBi
Certification	FCC, CE, RoHS
AC input voltage	100 - 240 V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Product color	White
LED indicators	LAN, Power, WAN, WLAN

Weight and Dimensions

Depth	172 mm
Width	110.2 mm
Height	31 mm
Weight	- g