11N Wireless Broadband Router
activate it. As some ISPs bind the user computer’s MAC
address, you need to clone the Router’s WAN MAC
address to the bind21ing PC’s MAC address. Select “MAC
Address Clone” in “Advanced Setting” to input your
computer’s MAC address and click “Apply” to activate it.
6
How to share my computer’s source with other
users in Internet？
、
9 If you want Internet users to access the internal server
via the Router such as e-mail server, Web, FTP, you can
configure the “Virtual Server” to come true.
9 Step 1: create your internal server, make sure the LAN
users can access these servers and know related service
port. For example, Web server’s port is 80; FTP is 21;
SMTP is 25 and POP3 is 110.
9 Step 2: in the Router’s web click “Virtual Server” and
select “Single Port Forwarding”.
9 Step 3: input the external service port given by the
Router, for example, 80.
9 Step 4: input the internal Web service port, for example,
80.
9 Step 5: Input the internal server’s IP address. If your
Web server’s IP address is 192.168.0.10, please input it.
9 Step 6: select the communication protocol used by your
internal host: TCP, UDP, ICMP.
70
To Next Page
Loading...
