300Mbps Wireless Access Point
300Mbps.
² Main SSID SSID (Service Set Identifier) is the unique name of the
wireless network. It is recommended to modify this name for
wireless client to recognize wireless signals.
² Broadcast SSID: When you select “Disable SSID broadcast”, AP
will not broadcast its own SSID number. If there is a wireless
connection request, you need to input SSID number manually.
² BSSID Basic Service Set Identifier of wireless network. In
IEEE802.11, BSSID is the MAC address of wireless access point.
² WLAN Isolation: The access control feature based on wireless
MAC address. When this feature is enabled, each of your wireless
clients will be in its own virtual network and will not be able to
communicate with each other. This feature is to isolate the
communication of wireless clients connected with different AP.
² Channel Specify the effective channel (from 1 to 13\Auto) of the
wireless network.
² Extension channel To increase data throughput of wireless
network, the extension channel range is used in 11n mode.
² Channel Bandwidth: Select the proper channel bandwidth to
improve the wireless performance. 20M bandwidth can improve the
anti-jamming ability of the wireless device. 40M bandwidth can
improve the flux of 11N client.
To Next Page
Loading...
Need help?
General
