11N Wireless Broadband Router
46
6.6 Wireless Access Control
To secure your wireless LAN, the wireless access control
is actually based on the MAC address management to
allow or block the specific clients to access the wireless
network. Select “Wireless Setting->Access Control” to
display the following screen:
¾ MAC Address Filter：Enable/disable MAC address
filter. Select “Close” to malfunction MAC address;
“disable” to prevent the MAC addresses in the list
from accessing the wireless network; “Allow” to
allow the MAC address in the list to access the
wireless network.
¾ MAC Address Management ： Input the MAC
address to implement the filter policy. Click “Add”
to finish the MAC add operation.
¾ MAC list：Show the added MAC addresses. You
can add or delete them.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
