Tenma 72-6947 - Specifications

-3-
• Measurement Range:
20W /200W /2000W
• Test frequency:
1kHz
• Accuracy:
20W : ± 2%rdg ± 2dgt or ± 0.1W, which is greater.
200W /2000W : ± 2%rdg ± 2dgt
• Protection:
Meets IEC-1010(EN61010),Installation CAT. III 100V
• Power Requirements:
9VDC(6 x1.5V AA” UM-3 batteries)
• Dimensions
8" (H) x 3
1
/2" (W) x 2
3
/16" (D)
• Included Accessories:
Test leads, instruction manual, carry case
• Low battery indication
“ “ symbol appears on the display
• Data hold indication :
“ HOLD " symbol appears on the display
• Display :
LCD 3 1/2 digit (2000 counts)
• Weight :
Approx. 1.2 lbs. (battery included)
+
-
3. Specifications
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.