Tenmars TM-197 User Manual

TM-197
9
Step 4. Set up the lower limit (Max.) for alarm
GO/NO-GO
1. The default value is 0G (0.0mT). Press or
to modify and setup the default value.
2. Again, press to go to Step 5.
If the min. value is more than the max.
value,
appears.
Step 5. Setup the measurement interval of alarm
GO/NO-GO
1. The default value is 2 seconds. Press or
to modify and setup the default value.
2. Again, press to go to Step 6.
Step 6. Setup year/month/date
1. Go to the mode to setup the year/month/date.
2. Press or to select the item to
modify, the digits of the selected item will flash.
3. Then, press or to correct the value.
4. Again, press to go to Step 7.
Step 7. Setup hour/minute:
1. Go to the mode to setup the hour/minute.
2. Press or to select the item to
modify, the digits of the selected item will flash.
3. Then, press or to correct the value.
4. Again, press to go to Step 8.
Step 8. Clear the manual record:
1. Go to the mode to clear the manual record
LCD shows .

Tenmars TM-197 Specifications

General

Brand	Tenmars
Model	TM-197
Category	Measuring Instruments
Language	English