TM-197
7 General Specifications:
Liquid crystal display (LCD) of 5 digits with the
displaying value up to 30000.
Backlight display. The backlight is manually
turned on (it will turn off automatically after turned
on for 30 seconds) and turned off. If connected
via an external power supply, the backlight will lit
and stay on; it will turn off until the external power
supply disconnected.
Enable and disable auto power off function
(default 15 minutes).
Measurement range: 0~3000mT (milli Tesla)
/0~30000G (Gauss); Auto Range function (with
Automatic Measurement).
Conversion of units: 1mT (milli Tesla) = 10G
(Gauss)
Relative value/Peak hold/Real time Zeroing
function.
Enable and disable auto power off function
(default power off is 15 minutes from the last
operation).
DATA HOLD(Data hold)
MAX/MIN (Maximum hold/ Minimum hold)
The GO and NO-GO alarm function and its
settings that can be applied to detect good and
defective products on the production line.
Unit switch for Gauss/Tesla.
The maximum, minimum, and average values:
auto export the top 10 max./top 10 min./ average
values based on the data which is recorded and
downloaded to the computer.
As connected to a PC, press REC to record the
real-time data in the PC.
Overload display: “OL”.
Manual recording: up to 200 logs.
To Next Page
Loading...
Need help?
General
