Tenmars TM-197 - 6 Software Installation

TM-197
10
2. Press or to select or where
the default value is 。
3. If the record is not cleared, press again
to return to the measurement mode when the
LCD shows .
4. If is selected, press to return to the
measurement mode and clear the record while
LCD shows "CLEAR".
6 Software Installation:
Windows 7 / Windows 10 operating systems
 Place the CD included with this meter into the
CD/DVD-ROM drive of the PC to connect to and install
the desktop program:
 Run the desktop application:
 Connect the USB cable included with this meter
to the PC, as shown in the figure below.