Why is my Tennant Floor Machine not sweeping well?
If your Tennant Floor Machine isn't sweeping well, it might be due to several reasons: * Worn brush bristles: Replace the brushes. * Improperly adjusted brushes: Adjust them correctly. * Debris in the brush drive: Clear the mechanism. * Main or side brush drive failure: Inspect the belt. * Hopper issues: Adjust hopper floor clearance, empty if full, or replace worn skirts.
What to do if my Tennant 215E will not travel?
If your Tennant Floor Machine won't move, several issues could be the cause. Check the directional control pedal linkage for adjustment or damage. Inspect the transmission drive belt for slipping or breakage. A transmission malfunction may require repair or replacement. Also, examine the wheel drive chains or sprockets for breakage and replace if necessary. Lastly, check the jackshaft belt for slipping or breakage, and adjust or replace as needed.
Why is my Tennant 215E Floor Machine dusting excessively?
If your Tennant Floor Machine is producing excessive dust, there could be a few reasons. The dust skirts and seals might be worn, damaged, or not adjusted properly; in that case replace or adjust them. Alternatively, the dust filter could be clogged, so shake and/or clean or replace the filter. A damaged vacuum hose could also be the cause, so replace it. Finally, check for a vacuum fan failure, which could be due to a broken or dislodged belt.
General| Brand | Tennant |
|---|---|
| Model | 215E |
| Category | Floor Machine |
| Language | English |
To Next Page
