EasyManua.ls Logo

Tennant 2300 - User Manual

Tennant 2300
37 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENGLISH - ESPAÑOL - FRANÇAIS - CHINESE
2300/2320/2340
Operator and Parts Manual
Manual De Operador
Y Lista De Repuestos
Opérateur Manuel et
Liste Des Piéces
使用手册及零件清单
607759
Rev. 05 (08-2008)
www.tennantco.com
Model Part No.:
608326 - 2300 (120V)
608325 - 2320 (120V)
9000449 - 2320 (230V)
607879 - 2340 (120V)
609602 - 2300 (CSA)
High Speed Floor Burnisher
Pulidora de Piso de Alta Velocid ad
Polisseuse de sols haute vitesse
高转速地擦机
*607759*

Table of Contents

Questions and Answers

  • B
    bmercadoAug 11, 2025
    Why Tennant 2300 Floor Machine motor does not operate?
    • J
      Julie RodriguezAug 11, 2025
      The Tennant Floor Machine motor might not be operating due to several reasons. It could be that the machine's circuit breaker or the building's circuit breaker has tripped. In the first case, determine the cause, reset the breaker on the machine, and wait 15 seconds before restarting. In the second case, reset the breaker and switch to a different circuit. Other potential causes include a faulty power cord, faulty wiring, a faulty twist grip switch, a faulty rectifier, or a faulty motor.
  • C
    Christina LopezAug 21, 2025
    How to fix Tennant Floor Machine when pad spins slowly?
    • B
      Brittany BergAug 21, 2025
      If the pad on your Tennant Floor Machine is spinning slowly or not at all, it could be due to a loose or broken drive belt. If the drive belt is loose, you should tighten it. If the drive belt is broken, you will need to replace it.
  • Y
    yleeAug 30, 2025
    What to do if Tennant 2300 circuit breaker trips continuously?
    • J
      Justin LucasAug 30, 2025
      If the Tennant Floor Machine's circuit breaker is tripping continuously, it could be due to a soiled pad. If this is the case, replace the pad. Another reason may be an improper pad for the application, so change to the proper pad. Other possible reasons include a defective circuit breaker or worn carbon brushes in the motor.

Tennant 2300 Specifications

General IconGeneral
Power SourceBattery
Cleaning Path30 inches
Machine TypeRide-on Scrubber
Tank Capacity Solution40 L
Tank CapacitySolution: 11 gal / 40 L; Recovery: 12 gal / 45 L

Related product manuals