EasyManua.ls Logo

Tennant 2340 - User Manual

Tennant 2340
37 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENGLISH - ESPAÑOL - FRANÇAIS - CHINESE
2300/2320/2340
Operator and Parts Manual
Manual De Operador
Y Lista De Repuestos
Opérateur Manuel et
Liste Des Piéces
使用手册及零件清单
607759
Rev. 05 (08-2008)
www.tennantco.com
Model Part No.:
608326 - 2300 (120V)
608325 - 2320 (120V)
9000449 - 2320 (230V)
607879 - 2340 (120V)
609602 - 2300 (CSA)
High Speed Floor Burnisher
Pulidora de Piso de Alta Velocid ad
Polisseuse de sols haute vitesse
高转速地擦机
*607759*

Table of Contents

Questions and Answers

  • A
    Ashley HaynesAug 8, 2025
    Why Tennant Floor Machine motor does not operate?
    • G
      gina97Aug 8, 2025
      The Tennant Floor Machine motor might not be operating due to several reasons. It could be that the machine's circuit breaker or the building's circuit breaker has tripped. In the first case, determine the cause, reset the breaker on the machine, and wait 15 seconds before restarting. In the second case, reset the breaker and switch to a different circuit. Other potential causes include a faulty power cord, faulty wiring, a faulty twist grip switch, a faulty rectifier, or a faulty motor.
  • C
    Carrie EvansAug 18, 2025
    How to fix Tennant 2340 when pad spins slowly?
    • B
      Brian MaloneAug 18, 2025
      If the pad on your Tennant Floor Machine is spinning slowly or not at all, it could be due to a loose or broken drive belt. If the drive belt is loose, you should tighten it. If the drive belt is broken, you will need to replace it.
  • A
    Annette MitchellAug 27, 2025
    What to do if Tennant 2340 circuit breaker trips continuously?
    • J
      Jacob CoxAug 28, 2025
      If the Tennant Floor Machine's circuit breaker is tripping continuously, it could be due to a soiled pad. If this is the case, replace the pad. Another reason may be an improper pad for the application, so change to the proper pad. Other possible reasons include a defective circuit breaker or worn carbon brushes in the motor.

Summary

OPERATION

SAFETY PRECAUTIONS

Hazard Warning Definitions

Specific Hazard Warnings

Highlights crucial warnings regarding flammable liquids and damaged cords.

Safe Operation Practices

Lists procedures for safe operation, pre-operation, and post-operation.

GROUNDING INSTRUCTIONS

WARNING LABEL

MACHINE COMPONENTS

MACHINE SETUP

INSTALLING PAD

MACHINE OPERATION

MACHINE MAINTENANCE

Drive Belt Tension Check

Carbon Brush Wear Check

TROUBLE SHOOTING

SPECIFICATIONS

ELECTRICAL DIAGRAMS

Tennant 2340 Specifications

General IconGeneral
Model2340
CategoryFloor Machine
Power SourceBattery
Battery Voltage24V
Pad RPM180 RPM
Brush Speed180 RPM

Related product manuals