To Next Page
R
Rodney RodriguezAug 9, 2025
What to do if my Tennant BOSS 2000E Floor Machine will not move?
- RRyan WadeAug 9, 2025
If your Tennant Floor Machine won't move when you rotate the control grips, there are several potential causes. First, ensure the reverse release lever is disengaged. Also, check if the drive circuit breaker has tripped and reset it if necessary. Other possible issues include a loose or worn drive belt (adjust or replace it), a wet drive belt (dry it off), faulty wiring, a faulty drive motor, a faulty speed control board, or a faulty roll switch. For issues beyond simple fixes, it's best to call for service.
General
