IB 340542 (7-02) 1
No. 340542
Machine: 6500
Published: 7-02
Rev. 00
INSTRUCTION BULLETIN
NOTE: DO NOT DISCARD the Parts List from the Instruction Bullet i n. Place the Parts
List in the appropriate place in your machine manual for future reference.
Retaining th e Parts L ist will make it easier to reorder individu al p arts and will
save you th e co st of ordering an entire kit.
NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.
Installation instructions for kit number 383265
DESCRIPTION:
This kit contains the parts needed to replace the main brush lift handle on the model 6500
sweeper.
Please follow step-by-step instructions.
SPECIAL TOOLS / CONSIDERATIONS: None
(Estimated time to complete: 1 hour)
PREPARATION:
FOR SAFETY: Before leaving or servicing machine, stop o n level surface and set parking
brake. Th en turn off machine an d remove key.
INSTALLATION:
1. Remove and set aside access plate 383189
and mounting hardware from the operator’s
compartment.
2. Disconnect the main brush lift cable 383194
from lift lever 383150.
383189
383150
383194
To Next Page
Need help?
General
