EasyManua.ls Logo

Tennant 6550 - Service Manual

Tennant 6550
354 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
6500/6550
330275
Rev. 02 (5--02)
Service Manual
Gas/LP/Diesel
*330275*

Table of Contents

Questions and Answers

  • D
    Deborah MarshallAug 10, 2025
    Why is my Tennant 6550 Blower having poor sweeping performance?
    • J
      Jeffrey HicksAug 10, 2025
      If your Tennant Blower's sweeping performance is poor, start by checking the brushes for wear and replace them if needed. Make sure the main and side brushes are properly adjusted. Clear any debris caught in the main brush drive mechanism. Ensure the hopper isn't full, and replace the hopper lip skirts if they are worn or damaged. Also, verify that the hopper door is fully open and the main brush is in the Float position.
  • C
    Christopher PetersonAug 25, 2025
    What to do if my Tennant Blower is excessively dusting?
    • R
      Regina Kelley MDAug 25, 2025
      If your Tennant Blower is excessively dusting, several factors could be the cause. Check the brush skirts and dust seals for wear, damage, or incorrect adjustment; replace or adjust them as needed. Also, inspect the hopper dust filter for clogs; shake, clean, or replace it. Ensure the shaker solenoid spring is connected and the filter shaker plate is correctly installed. Verify that the shaker solenoid pin is properly inserted into the hole of the filter element comb. Operating the engine at (Fast 1) speed instead of (Fast 2) might help. Check the vacuum hose for damage and replace if necessary. Remember to check if the hopper door is fully open and reset the Thermo Sentryt if it has tripped.

Tennant 6550 Specifications

General IconGeneral
BrandTennant
Model6550
CategoryBlower
LanguageEnglish

Related product manuals