EasyManua.ls Logo

Tennant 6100 - User Manual

Tennant 6100
76 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
6100
www.tennantco.com
Rider Sweeper
Operator Manual
330250
Rev. 10 (08-2008)
North America / International
(Electric)
*330250*

Table of Contents

Other manuals for Tennant 6100

Preview: Instruction Bulletin
Instruction Bulletin6 pages

Questions and Answers

  • E
    Erica WilsonJul 27, 2025
    Why is my Tennant Floor Machine's sweeping performance poor?
    • J
      Jamie JacksonJul 27, 2025
      If the Tennant Floor Machine exhibits poor sweeping performance, several factors could be responsible. Worn brush bristles should be replaced, and the main and side brushes need proper adjustment. Debris caught in the main brush drive mechanism should be removed. Check if the hopper is full and empty it if necessary. Replace worn or damaged hopper lip skirts. Clogged hopper dust filter should be shaken, cleaned, or replaced. Damaged large debris trap should be repaired or replaced.
  • J
    Joseph GravesAug 5, 2025
    What to do if my Tennant Floor Machine will not start?
    • T
      Tracy McdanielAug 5, 2025
      If the Tennant Floor Machine won't start, check the engine oil level and add oil if it's low. Also, verify that the fuel tank valve is open, whether it's the LPG tank valve or the valve below the gasoline tank.
  • S
    Steven StewartAug 15, 2025
    How to stop excessive dusting from Tennant Floor Machine?
    • J
      jfisherAug 15, 2025
      Excessive dusting from your Tennant Floor Machine can occur for several reasons. Ensure the vacuum fan damper is open by pressing the vacuum fan/filter shaker switch to the on position. Check brush skirts and dust seals for wear, damage, or misalignment, and replace or adjust them as needed. The hopper dust filter may be clogged, requiring shaking, cleaning, or replacement. Empty the hopper if it is full.

Summary

Safety Precautions

Do Not Operate Machine

Guidelines for safe operation, emphasizing training and understanding the manual.

Before Starting Machine

Checks to ensure safety devices are in place and functional before operation.

When Starting Machine

Key steps and precautions to take when starting the machine.

When Using Machine

Safe operating practices during use, including speed and incline advice.

Before Leaving or Servicing Machine

Procedures to follow before stopping or working on the machine.

When Servicing Machine

Safety measures for maintenance and repair activities.

When Loading or Unloading Machine

Procedures and safety checks for transporting the machine.

Operation

Operator Responsibility

Outlines the operator's duties regarding machine care and reporting.

Controls and Instruments

Overview and visual identification of the machine's controls and instruments.

Operation of Controls

Detailed instructions on how to operate various controls and pedals.

Starting the Machine

Sweeping and Brush Information

Sweeping

Stop Sweeping

Stopping the Machine

Emptying the Hopper

Machine Troubleshooting

Guide to identifying and resolving common problems with the machine.

Maintenance

Maintenance Chart

A table outlining maintenance tasks based on time intervals.

Lubrication

Batteries

Charging the Batteries

Instant Access Hopper Filter

Main Brush

Information about the main brush, its function, and daily checks.

Replacing Main Brush

Checking and Adjusting Main Brush Pattern

Side Brush

Information on the side brush, its function, and daily checks.

Replacing Side Brush

Brakes (For machines below serial number 002363)

Brakes (For machines serial number 002363 and above)

Transporting the Machine

Specifications

General Machine Dimensions;Capacities

Detailed dimensions and capacity specifications for the machine.

General Machine Performance

Key performance metrics such as speed, turning radius, and incline ratings.

Power Type

Tennant 6100 Specifications

General IconGeneral
BrandTennant
Model6100
CategoryBlower
LanguageEnglish

Related product manuals