EasyManua.ls Logo

Tennant 6650 - User Manual

Tennant 6650
98 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
6650
*330910*
www.tennantco.com
330910
Rev. 05 (03-2008)
North America / International
Sweeper
Operator Manual
(Gas/LPG)

Table of Contents

Questions and Answers

  • M
    mitchell51Jul 31, 2025
    Why is my Tennant 6650's sweeping performance poor?
    • J
      Jennifer StaffordJul 31, 2025
      Poor sweeping performance in your Tennant Blower can stem from several causes. Check if the brush bristles are worn and need replacement. Ensure the main and side brushes are properly adjusted. Clear any debris caught in the main brush drive mechanism. Also, make sure the hopper isn't full and that the hopper lip skirts aren't worn or damaged. Finally, ensure the hopper door is fully open and the main brush is in the Float position.
  • F
    flynnbruceAug 15, 2025
    How to fix excessive dusting with Tennant 6650?
    • T
      Todd SchneiderAug 15, 2025
      Excessive dusting with your Tennant Blower may occur due to several reasons. Start by checking the brush skirts and dust seals for wear, damage, or misalignment; replace or adjust them as needed. Ensure the hopper dust filter isn't clogged by shaking, cleaning, or replacing it. Verify that the shaker solenoid spring is connected and the filter shaker plate is installed correctly. Also, insert the shaker solenoid pin into the hole of the filter element comb and operate the engine at the Fast 1 speed. Inspect the vacuum hose for damage and replace if necessary. Make sure the hopper door is fully open and reset the Thermo Sentry if it has tripped.

Summary

Safety Precautions

General Operating Safety

Key safety guidelines for machine operation, starting, and servicing.

Servicing and Loading Safety

Precautions for machine servicing, loading, and unloading procedures.

Safety Labels and Warnings

Identification and location of critical safety labels on the machine.

Operation

Operator Responsibility

Operator's duties for daily maintenance and machine care.

Machine Components

Identification of major machine parts and their locations.

Control Panel Symbols

Explanation of symbols used on the machine's control panel.

Controls and Instruments

Diagram and identification of all machine controls and instruments.

Maintenance

Maintenance Chart

Schedule of daily, 50-hour, and 100-hour maintenance checks.

Lubrication

Procedures for lubricating engine, wheel bearings, and other components.

Hydraulics

Information on hydraulic fluid reservoir, fluid type, hoses, and motor.

Engine Cooling System

Procedures for checking coolant level, cleaning radiator, and flushing the system.

Specifications

General Machine Dimensions;Capacities

Detailed measurements and capacities for the machine's physical attributes.

General Machine Performance

Key performance metrics including speeds, turn width, and climb angles.

Tires

Specifications for tire type, size, and pressure.

Index

Tennant 6650 Specifications

General IconGeneral
BrandTennant
Model6650
CategoryBlower
LanguageEnglish

Related product manuals