EasyManua.ls Logo

Tennant S8 - User Manual

Tennant S8
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
S8
Battery Sweeper
Operator Manual
Model Part No.:
MS85004
MS85904 UK
9001217
Rev. 01 (12-05)
TENNANT N.V.
Industrielaan 6 5405 AB P.O. Box 6 5400 AA Uden-The Netherlands
europe@tennantco.com www.tennantco.com

Other manuals for Tennant S8

Questions and Answers

  • J
    janet97Jul 26, 2025
    Why Tennant S8 Blower battery charger does not turn on?
    • M
      Mark HollandJul 26, 2025
      If the Tennant Blower battery charger doesn't turn on, it could be due to a couple of reasons. First, check the plug connection to ensure it's properly connected to the main power supply. Another potential cause is a faulty input charger fuse, which would require replacement.
  • B
    Brian MurphyJul 31, 2025
    What to do if [bat] code is displayed on Tennant Blower?
    • J
      Jordan ChanJul 31, 2025
      If the '[bat]' code appears on your Tennant Blower, there are a few things you can check: * Inspect the battery connections to ensure they are secure and undamaged. * Also, examine the output charger fuse and replace it if it's faulty. * If the battery exceeded maximum voltage level, no action is necessary.
  • F
    fjonesAug 4, 2025
    What to do if [E03] code is displayed on Tennant S8 Blower?
    • M
      Michael BrooksAug 4, 2025
      If the '[E03]' code is displayed on your Tennant Blower, it means the maximum charging time for the charging phase was exceeded, possibly due to a sulfated or faulty battery. Try repeating the charging cycle. If the error code reappears, you should check or replace the battery.
  • J
    Jacob RossAug 8, 2025
    How to fix [E02] code displayed on Tennant S8 Blower?
    • D
      Denise HernandezAug 8, 2025
      If the '[E02]' code is displayed on your Tennant Blower, it indicates that the safety thermostat exceeded the maximum internal temperature. Ensure that the charger vents are not covered to allow for proper ventilation.
  • K
    kellystevensAug 12, 2025
    What does [E01] code mean on a Tennant S8 Blower?
    • A
      Amber RiveraAug 12, 2025
      The '[E01]' code on your Tennant Blower indicates that the maximum battery voltage allowed was exceeded. No action is necessary.
  • R
    robert46Aug 17, 2025
    What does [SCt] code mean on a Tennant S8?
    • M
      Michael RayAug 17, 2025
      If the '[SCt]' code is displayed on the Tennant Blower, it means that the safety timer exceeded the maximum charging time, interrupting the charging cycle. The suggested solution is to replace the battery.
  • H
    Henry HessAug 21, 2025
    Why is the yellow LED light blinking on my Tennant Blower?
    • L
      Luis Smith IIAug 21, 2025
      A blinking yellow LED light on your Tennant Blower suggests one of the following issues: either the wrong battery is being used, the battery is not properly connected, or there is a short circuit in the output.

Summary

Technical Features and Specifications

Safety Precautions and Guidelines

General Safety Information and Warnings

Covers intended use, warnings, and symbol definitions on the left column.

Operational Safety Guidelines

Lists specific safety actions for operation, servicing, and transport on the right column.

Preparing the Machine for Operation

Installing the Battery

Guide on safely connecting and securing the 12-volt battery.

Operating the Sweeper

Starting the Machine

Step-by-step operations to start the machine and prepare for cleaning.

Routine Maintenance

Maintenance Schedule

Checklist for routine maintenance tasks based on usage hours.

Battery Recharge

Procedure and indicator light meanings for recharging the battery.

Charger Settings and Troubleshooting

Charger Settings Configuration

Instructions for configuring charger dip-switches for WET or SEALED batteries.

Charger Troubleshooting and Error Codes

Table of common problems, their causes, and solutions, including error codes.

Filter Maintenance

Brush Replacement and Adjustment

Replacing and Adjusting the Side Brush

Instructions for replacing and adjusting the height of the side brush.

Replacing and Adjusting the Main Brush

Guide for replacing the main brush and adjusting its pressure.

Belt Replacement

Troubleshooting and Scrapping

Troubleshooting Common Faults

Table listing faults, their causes, and recommended remedies for the machine.

Tennant S8 Specifications

General IconGeneral
Power SourceDiesel
Engine Power74 hp (55 kW)
Fuel TypeDiesel
Weight6, 200 lb (2, 812 kg)
Width61 in (155 cm)
Height83 in (211 cm)
Length130 in (330 cm)

Related product manuals