IB 9007878 (12- 2014) 1
INSTRUCTION BULLETIN
No. 9007878
Machine: S20
Published: 12- 2014
Rev. 01
NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the
Parts List in the appropriate place in the machine manual for future
reference. Retaining the Parts List will make it easier to reorder
individual p arts and will save th e cost of ordering an entire kit.
NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.
Installation instructions for kit number 9007870
SYNOPSIS:
This kit contains the parts needed to install a backup alarm / strobe light kit on S20 machines
equipped with the optional overhead guard (machines serial numbers 001319 and above only).
Please follow step-by-step instructions.
SPECIAL TOOLS / CONSIDERATIONS: NONE
(Estimated time to complete: 1.5 hours)
PROTECT THE ENVIRONMENT
Please dispose of packaging mat erials , used machine component s
such as bat t er ies and f luids in an envir onment ally saf e way according
to local was t e disposal regulat ions.
Always remember to recycle.
PREPARATIO N:
1. Park the machine on a clean level surface,
turn off the machine, remove the key, and set
the parking brake.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
2. Open the main cover.
3. Disconnect the battery cables from the
battery.
W ARNING: Always disconnect battery
cables from machine before working on
electrical components.