▪ Use the No.5 Hex Key to slightly loosen the mounting screws of
the brake clamps so that they can move slightly.
▪ Press the front brake 3 to 5 times.
▪ Hold the front brake lever and tighten the mounting screws of
the brake clamps.
05
If scraping occurs, follow the steps below to make adjustments:
▪ Turn the front wheel by hand and check for the sound of friction.
▪ If you hear friction, loosen the mounting screws of the brake
clamps.
No.5 Hex Key
05.
INSTALL THE FRONT WHEEL
015
Assemble your TENWAYS e-bike
To Next Page
Loading...
