▪ Use the No.5 Hex Key to slightly loosen the mounting screws of
the brake clamps so that they can move slightly.
▪ Press the front brake 3 to 5 times.
▪ Hold the front brake lever and tighten the mounting screws of
the brake clamps.
No.5 Hex Key
▪ Turn the front wheel by hand and check for the sound of friction.
▪ If you hear friction, loosen the mounting screws of the brake
clamps.
Note: This step is very important. Please follow the instructions
carefully. (Keep the protective sheets from the brakes for future
use.)
01
Adjust the distance between the mudguard and the tire, then
use the No.5 Hex Key to fix the mudguard lug to the front fork.
The torque should be 8-10 Nm.
Tools needed: No.4 and
No.5 Hex Keys
05.
BAUEN SIE DAS VORDERRAD EIN
06.
INSTALL THE FRONT MUDGUARD
016 Assemble your TENWAYS e-bike
To Next Page
Loading...
