9. Install the pedals
Distinguish between the left and right pedals. The
right and left pedals are marked by an R and an L
respectively. The right pedal is used for the side with the
crankset, while the left one is used for the other side.
Tighten the right pedal clockwise and the left pedal
counterclockwise. Please stop tightening the pedals
if you feel a lot of resistance. If this happens, align and
reinstall the pedals.
15 mm Wrench
Attention
Do not force the installation if you feel a lot of resistance.
Right pedal
Tighten the right pedal
clockwise.
Left pedal
Tighten the left pedal
counterclockwise.
LR
Bicycle Pedals
R L
18
To Next Page
Loading...
