Tenways CGO800S - Install the pedals; Separate the left and right pedals. The right and left pedals are marked by an R and an L respectively. The right pedal is used for the side with the crankset, while the left one is used for the other side; Tighten the right pedal clockwise and the left pedal counterclockwise; Please stop tightening the pedals if you feel a lot of resistance. If this happens, align and reinstall the pedals

(1)
Short press the RIGHT/LEFT turn indicator button to turn on the rear
turn signal on the RIGHT/LEFT side.
(2)
(3)
Press and hold the LEFT-TURN Indicator button for 2 seconds to turn
on the head light and tail light.
Press and hold the RIGHT-TURN Indicator button for 2 seconds to turn
off the head light and tail light.
How to use the head light and the tail light.
The e-bike will enter Assisted Pushing if you press and hold the
DOWN button for 2 seconds.
Assisted pushing.
This feature can only be used when you’re walking and pushing the e-bike.
18 19