Tenways CGO800S - Rotate the head of the handlebar; Twist the head of the handlebar so that it faces forward; Remove the front wheel; Remove the front wheel and the plastic protective covers on both sides of the wheel

(1)
Remove
Plastic
Covers
Twist the head of the handlebar so that it faces forward.
(1)
Remove the front wheel and the plastic protective covers on
both sides of the wheel.
Hold your e-bike with the kickstand down to facilitate the
next installation steps.
02 03
Rotate the head of the handlebar. Remove the front wheel.
(2)
You must remove the front wheel in the direction of the spokes to avoid
scratching them.
4 5