Install the battery.Install the pedals.
(1)
(1)
Separate the left and right pedals.
The right and left pedals are marked by an R and an L respectively.
The right pedal is used for the side with the crankset, while the left
one is used for the other side.
Tilt and clip the lower end of the battery into the battery slot,
and then press the upper end.
(2)
You will hear a click when the battery is rmly seated.
07 08
Left Right
Tighten the right pedal clockwise and the left pedal
counterclockwise.
Please stop tightening the pedals if you feel a lot of resistance. If
this happens, align and reinstall the pedals.
(2)
(3)
10mm
Wrench
15mm
Wrench
10 11
To Next Page
Loading...
