Teo IP Phone 7810 User Guide 17
If the entry is not set up for immediate dialing, you
can add additional characters, such as extension
numbers or PIN codes, with the dial pad (page 7).
When all characters have been entered, select SEND
or press the
OK
key.
Note: Calls are automatically dialed after a preset
timeout that has been set by your installer.
To exit the Call Directory without dialing or deleting
an entry, press the
DIR
key.
To add or change directory entries, see page 28.
U
U
s
s
i
i
n
n
g
g
t
t
h
h
e
e
S
S
p
p
e
e
a
a
k
k
e
e
r
r
p
p
h
h
o
o
n
n
e
e
The speakerphone feature allows two-way hands-free
conversation and on-hook dialing.
Note: Your installer may disable the microphone (see Call
Monitoring), or completely disable the speakerphone.
Placing and Answering Calls
If your telephone is idle, an idle line appearance will be
automatically selected when you press the
SPKR key, or the
speakerphone will be activated when you press a Speed Dial or
DSS/BLF key while on-hook.
You can answer a ringing line appearance by pressing the
SPKR key.
Muting the Microphone
You can mute the microphone for privacy. The other party will
not be able to hear you, but you can still hear the other party.
Press the
MUTE key to disable or enable the
microphone.
The indicator light on the
MUTE key will be on when the
microphone is muted.
The microphone is located at the front right
corner of the telephone.
For proper speakerphone operation, make sure
that the telephone is placed directly on a hard
surface, and the microphone is unobstructed.
1=91025
BKSP
123
1=1025
BKSP SEND 123
To Next Page
Loading...
