Teo 7810 - Key Functions and Indicators

Teo IP Phone 7810 User Guide 5
5) Message Waiting Indicator – a bright red indicator is lit
when messages are waiting, controlled by the network.
6) LOG Key – displays Call Log options (page 14).
7) SETUP Key – enters and exits Setup Mode (page 22).
8) INFO Key – displays version and configuration information
about the 7810 and installed options (page
20).
9) DIR (Directory) Key displays the Call Directory (page 16).
10) Volume Keys – adjust the receiver/speaker volume when on
a call; adjust the ringer volume when on-hook (page 19).
11) MUTE Key – mutes the microphone when using the
speakerphone or handset/headset. A red indicator on the
key is lit when mute is active (page
17).
12) SPKR (Speaker) Key – activates the speakerphone or Call
Monitoring (if enabled by your installer). A green indicator
on the key is lit when the speakerphone or Call Monitoring
is in use (page
17).
13) Dial Pad – dials telephone numbers, and sends DTMF tones
to external equipment such as voice mail systems. The dial
pad is also used for text and number entry during setup.
14)
TRAN (Transfer) Key – places the current call on hold, and
selects an idle line appearance for transferring the call. A
second press completes a transfer (page 10).
15)
CONF (Conference) Key – adds other parties to a conference
call (page 11).
16)
DROP Key – removes the last party added to a conference
call, or disconnects you from a call and returns new dial
tone when not in conference mode (page 11).
17) HOLD Key – places a call on hold (page 9).
18) VMAIL (Voice Mail) Key – accesses network voice mail
services (page
19).
19) HEADSET Key – activates the headset. A green indicator is lit
when the headset is in use (page
18).
20) Headset Jack – a jack on the underside of the telephone
connects to an optional standard headset.
21) Handset Jack – a jack on the underside of the telephone
connects to the included handset.
22) Microphone – used for hands-free (speakerphone) calling;
located under the right front corner of the telephone.
23) Telephone Identification Label Area – indented area for a
directory number label. Use ½” x 1¾” adhesive labels
(Avery 8167 / 5267 or equivalent).