GB
English
Instruction Manual
Multi Synergic 250 - Multi Synergic 380 - Multi Synergic 500 and Accessories
DESCRIPTION CHAP. PAGE
1. DECLARATION OF CONFORMITY 01
2. RAEE STANDARDS 02
3. SAFETY PRECAUTIONS 02
4. GENERAL DESCRIPTION 02
5. STAND BY 03
6. VRD - VOLTAGE REDUCTION DEVICE 03
7. ALARMS AND SETTINGS 03
8. POWER SUPPLY QUALITY IN THE VOLTAGE, IN THE MISSING PHASE, 03
IN THE FREQUENCY
9. OUTPUT WELDING CONDITIONS, SHORT CIRCUIT OR 03
WELDING OVER LIMITS
10. AUXILIARY ELECTRONIC WARNING AND FAILURE 04
11. WATER COOLING UNIT STATUS 04
12. COMMUNICATION WITH THE EXTERNAL WIRE FEEDER 04
13. ACCESSORIES 05
14. MAIN FEATURES MULTI SYNERGIC 280 05
15. MAIN FEATURES MULTI SYNERGIC 350 06
16. MAIN FEATURES MULTI SYNERGIC 500 07
17. FRONT PANEL FUNCTIONS AND ADJUSTMENTS 08
18. FRONT PANEL LAYOUT 09
19. MANUAL ELECTRODE SETTING. CONNECT THE WORK PIECE CABLE TO 10
THE NEGATIVE RECEPTACLE, AND THE ELECTRODE OLDER T THE POSITIVE
RECEPTACLE
20. TIG SETTING. CONNECT THE GAS INPUT TO THE GAS REGULATOR AND A 11
DJUST THE GAS FLOW BETWEEN 6 TO 8 LITRES PER MINUTE
21. MANUAL PULS TIG SET 12
DESCRIPTION CHAP. PAGE
22. SYNERGIC TIG SETTING 13
23. MIG-MAG WELDING 14
24. MIG-MAG MANUAL 15
25. MIG-MAG SYNERGIC 16
26. PULS MIG SYNERGIC 17
27. DIGITAL TORCH 19
INDEX
To Next Page
Loading...
