17
RECORDING
• Recordings are triggered manually or automatically. If Auto-Record is enabled in the
Recording Settings, a new recording is automatically created when a broadcast starts.
• For best results, use Class 6 or higher SD cards.
• Media should be formatted using FAT32 or exFAT.
• If a broadcast is interrupted for connectivity reasons, recording will continue.
• New recordings are automatically started after the le size limit is reached.
RECORDING CONSIDERATIONS
Wave supports recording to an SD card or compatible USB thumb drive. Each recording
is saved with the same resolution and bitrate set in Wave.
1
2
Enter the Recording menu, and select Enabled.
Insert a compatible SD card or USB drive into the corresponding slot.
3
Select a drive to record to.
4
Create a name for the recording, select a format, then enable Auto-Record (optional).
To Next Page
Loading...
