Need help?Do you have a question about the Teradek Wave and is the answer not in the manual?
Instructions for attaching Wave to a camera arm mount and securing it.
Steps to create a new event by naming and selecting a thumbnail.
Options for connecting Wave to the internet via Wi-Fi, Ethernet, or modem.
Choosing an account, channel, or quick stream for live broadcasting.
Setting video/audio quality and recording options before streaming.
Shows connection type, IP address, and network name.
Displays event name, destination, resolution, and bitrates.
Select HDMI/Analog input and adjust audio input and headphone volume.
Start/stop recording and access recording settings.
Displays stream status and duration, allows starting/ending live stream.
Access event configuration, stream quality, and system settings.
Configure Wi-Fi connection in Access Point or Client mode.
Instructions for connecting Wave using an Ethernet cable.
Steps to connect Wave using a compatible 3G/4G/5G USB modem.
Cloud platform for multi-destination streaming and network bonding.
Steps to visit sharelink.tv, select a plan, and create an account.
Process of selecting Sharelink, copying authorization code, and adding a new device.
List of connection types supported by Sharelink (Ethernet, USB modem, Wi-Fi).
Remotely monitor stream stats, enable hotspot bonding for connectivity.
Details on Stats, Info, Audio/Video, and Link/Unlink Phone tabs.
Insert media, enable recording, select drive, and create recording name.
Notes on manual/auto recording, SD card usage, formatting, and file limits.
General| Resolution | Up to 1080p60 |
|---|---|
| Weight | 0.5 lbs |
| Codecs | H.264 |
| SDI Standards | SMPTE 259M, 292M, 424M |
| Color Sampling | 4:2:2 |
| Video Input | HDMI |
| Video Output | HDMI |
| Audio Input | 3.5mm Analog Mic/Line In |
| Network Connectivity | Ethernet, Wi-Fi |
| Power Supply | USB |
| Streaming Protocols | RTMP, RTMPS, HLS |
| Bit Depth | 8-bit |
To Next Page
