1
2
Turn on your video source then connect it to Wave’s HDMI input (J).
Connect power to Wave via the included USB-C adapter or attach one or both
Sony L-series batteries to the built-in dual-battery plate on the back (D).
POWER AND CONNECT
3
4
Once Wave has booted, the main screen will be displayed. From the main screen
you can create an event by tapping the Create a new Event tab or the + icon, or by
swiping left on the screen.
Use a hot shoe mount and a 1/4”-20 screw or any other mounting hardware to
mount Wave to your camera, if desired.
3
Press the Power button (B). Wave begins to boot as soon as the power is turned on.
5
NOTE: Wave encoders are hot swappable between USB-C and L-series batteries. Both power source
types can be connected together, but Wave will draw power from the USB-C power source by default.
6
Attach the two Wi-Fi antennas to the RP-SMA connectors (E).
To Next Page
Loading...
