Teradek Wave - Wave App; Wave App Functionality; Main Display Information

NETWORK CONFIGURATION
Use Wave’s display to congure and/or reconnect Wave to a network and get online.
2
1
b. Client Mode - Select Client, select one of the available networks, then enter your
credentials for that network.
Select a wireless mode:
CONNECT TO A WIFI NETWORK
Tap the gear icon or swipe right on the display to enter the System Settings menu.
a. Access Point (AP) Mode - Connect your phone or laptop to Wave’s network,
Wave-XXXXX (XXXXX represents the last ve digits of Wave’s serial number).
Wave supports two wireless (Wi-Fi) modes; Access Point (AP) Mode (for bonding
multiple cellular devices for increased bandwidth) and Client Mode (for normal Wi-Fi
operating and connecting to your local router).
3
12
Once connected, the display will list the network Wave is connected to in the
Connected to eld, along with the IP address. To access the web UI: Enter the
network’s IP address in your web browser’s navigation bar.