Teradek CUBE Series - User Manual

Describes Cube Decoders designed for handheld monitors or HD displays with HDMI or HD-SDI output.

Provides the URL for the Teradek Cube support forum for updates and documentation.

Details the pin configuration for the 4-pin LEMO connector used for Cube power connection.

Details Cube Encoder's audio input via HDMI, HD-SDI, TRS, and Decoder's audio output.

Instructions for connecting the antenna for Cube's WiFi functionality and compatibility.

Steps for streaming Cube Encoder video to a computer via VLC using an ad hoc network.

Steps for streaming Cube Encoder video to a computer via a router using infrastructure networking.

Explains direct wireless connection between encoder and decoder with limited range.

Details connection via router for longer range and higher bitrates between encoder and decoder.

Stream HD video over the internet using Livestream.com or a custom content distribution system.

Guide to configuring Cube for streaming to iOS devices (iPad, iPhone, iPod Touch).

Procedure to view video using TeraCentral in an ad hoc network configuration.

Procedure to view video using TeraCentral in an infrastructure network configuration.

Configure video options using TeraCentral, including adjusting latency.

How to adjust video latency using the Caching setting in milliseconds.

Accessing Cube's menu system via login with username and password.

Displays settings, network info, and allows video launch and stream customization.

Details on Compression Profile, Caching, and Intra Refresh mode for encoding.

Configuration for Title Text, Video/Audio Bitrate, Output Resolution, Keyframe Interval, Show Title/Timecode.

Configures stream types (RTP, HTTP Live, Livestream.com) and RTSP settings.

Steps to configure Cube for native integration with Livestream.com.

Explains button press sequences for Livestream.com functionality.

Guidance on setting up your own content distribution network for streaming.

Step-by-step guide to configure Cube for iOS streaming using ZeroConfSpy.

Procedure to pair Cube Encoders and Decoders using the reset button.

Enabling Canon 5D mode for encoder resolution switching.

Instructions to restore Cube to its factory default settings.

Information on pre-paired encoder-decoder sets and their network setup.

Procedure to factory default paired encoder-decoder units.

Steps to create an ad hoc network between Cube encoder and decoder.

Steps to network Cube encoder and decoders using a wireless router.

Detailed steps for pairing Cube encoder and decoder using the reset button.

Steps to pair Cube encoder and decoder using the device's menu system.