Teradek CUBE Series - Cube to Internet Streaming; Livestream.com Native Integration; Cube Button Mode for Livestream.com; Custom Content Distribution Network

Cube to Internet
There are two ways to stream HD video over the Internet: Using Livestream’s
turn-key content distribution platform or using your own custom content
distribution network.
Livestream.com Native Integration
To configure Cube for Livestream.com:
1. Join any network that has a broadband Internet uplink.
2. Enter Cube’s menu system, then click Video Setup - Stream Settings.
3. Click the Type menu then select Live Internet Streaming.
4. Enter your Livestream.com username, password, and channel name.
5. Verify login.
6. Configure the settings as desired, then click Apply.
7. To begin broadcasting click Start Broadcast.
Cube Button Mode for Livestream.com
•
1-4 secs: Broadcast start/stop - Codec LED flashes Green during
broadcasting, red during broadcasting/recording, orange when reconnecting.
•
5-9 secs: Pairing - Codec & WiFi LEDs alternate Green
•
10-19 secs: Factory reset (save network) - WiFi LED cycles all colors
•
20+ secs: Full factory reset - Codec & WiFi cycle all colors
Custom Content Distribution Network
Creating your own content distribution network requires proficiency in IT
technologies and IP video. Consult with a network administrator for instructions
on streaming video over the Internet.
23