Operator's Manual Fourth Edition • Fourth Printing
Work Area Safety
Do not operate the
machine in strong or gusty
winds. Do not increase the
surface area of the
platform or the load.
Increasing the area
exposed to the wind will
decrease machine
stability.
Do not drive the
machine on or near
uneven terrain,
unstable surfaces or
other hazardous
conditions with the
platform raised.
Do not place or attach
fixed or overhanging loads
to any part of this
machine.
Do not place ladders or
scaffolds in the platform or
against any part of this
machine.
Use extreme care and slow speeds while driving
the machine in the stowed position across
uneven terrain, debris, unstable or slippery
surfaces and near holes and drop-offs.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not replace items critical to machine stability
with items of different weight or specification.
Do not modify or alter an aerial work platform
without prior written permission from the
manufacturer. Mounting attachments for holding
tools or other materials onto the platform,
toeboards or guard rail system can increase the
weight in the platform and the surface area of
the platform or the load.
Do not transport tools and materials unless they
are evenly distributed and can be safely
handled by person(s) in the platform.
Do not use the machine on a moving or
mobile surface or vehicle.
Be sure all tires are in good condition, air-filled
tires are properly inflated and lug nuts are
properly tightened.
14 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
To Next Page
Loading...
