Terex CBR 40H-4 User Manual

TABLE OF CONTENTS
CBR 40H page 0.04
rev. 12.05 40H_0i_04
3 ERECTION - USE - DISMANTLING
page
3.1 INSTRUCTIONS FOR POSITIONING AND ERECTION 3.01
3.1.1 ELECTRICAL CONNECTION 3.01
3.1.2 POSITIONING THE CRANE 3.04
3.1.3 PREPARING THE JIB 3.06
3.1.4 TOWER ERECTION 3.07
3.1.5 BALLASTING 3.08
3.1.6 JIB ALIGNMENT 3.10
3.2 SAFETY DEVICES - FUNCTION AND SETTING 3.13
3.2.1 POSITIONING THE SAFETY DEVICES ON THE CRANE 3.14
3.2.2 STATIC MOMENT LIMITER 3.15
3.2.3 DYNAMIC MOMENT LIMITER 3.16
3.2.4 HIGH SPEED LIMITER 3.17
3.2.5 MAXIMUM LOAD LIMITER 3.18
3.2.6 UP LIMIT SWITCH 3.19
3.2.7 DOWN LIMIT SWITCH 3.20
3.2.8 TROLLEY LIMIT SWITCH 3.21
3.2.9 SLEWING LIMIT SWITCH 3.22
3.3 BRAKES - TESTING AND SETTING 3.23
3.4 GENERAL OPERATING INSTRUCTIONS 3.25
3.4.1 BEFORE PUTTING INTO SERVICE 3.25
3.4.2 INSTRUCTIONS FOR A RATIONAL USE OF THE CONTROLS 3.25
3.4.3 TAKING OUT OF SERVICE 3.26
3.5 SWITCHING OVER 2/4-PART LINES 3.27
3.6 DISMANTLING INSTRUCTIONS 3.28

Terex CBR 40H-4 Specifications

General

Brand	Terex
Model	CBR 40H-4
Category	Construction Equipment
Language	English