First Edition • Second Printing Operator's Manual
Work Area Safety
Part No. 1308591GT GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite 17
Do not operate the machine with the chassis trays
open.
Do not push off or pull
toward any object outside
of the platform.
Maximum allowable
side force
Indoor – 90 lbs/400N
Outdoor – 45 lbs/200 N
Indoor – 90 lbs/400N
Outdoor – 45 lbs/200 N
Indoor – 45 lbs/200N
Outdoor – 45 lbs/200 N
Do not alter or disable the limit switches.
Do not alter or disable machine components that
in any way affect safety and stability.
Do not replace items critical to machine stability
with items of different weight or specification.
Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine stability.
Each battery must weight a minimum of
61 lbs/28 kg. Charger tray including batteries must
weigh a minimum of 108lbs/49kg, G-CON tray
including batteries must weigh a minimum of
105lbs/48kg
Do not modify or alter a mobile elevated work
platform without prior written permission from the
manufacturer. Mounting attachments for holding
tools or other materials onto the platform,
toeboards, or guard rail system can increase the
weight in the platform and the surface area of the
platform or the load.
Do not place or attach
fixed or overhanging loads
to any part of this
machine.
Do not place ladders or
scaffolds in the platform or
against any part of this
machine.
Do not transport tools and materials unless they
are evenly distributed and can be safely handled
by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure all tires are in good condition, castle nuts
are properly tightened and cotter pins are properly
installed.
To Next Page
Loading...
Need help?
General
