Terex GS32MT-101 - Specifications

Operator's Manual First Edition • Third Printing
Specifications
62 GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite Part No. 1308591GT
Speci fic ations
Model
GS-
1432m
Height, working outdoor
18 ft 0 in
5.66 m
Height, platform outdoor
12 ft 0 in
3.66 m
Height, working indoor
20 ft 1 in
6.30 m
Height, platform indoor
14 ft 1 in
4.30 m
Height, stowed maximum, rails up
6 ft 2 in
1.88 m
Height, stowed maximum,
rails
folded
4 ft 11 in
1.49 m
Platform height, stowed maximum
2 ft 6 in
0.78 m
Height, guard rails
3 ft 7 in
1.10 m
Width
32 in
0.81 m
Length, stowed
4 ft 7 in
1.40 m
Length, platform extended
6 ft 7 in
2 m
Platform extension length
24 in
0.60 m
Platform dimensions (length x
width)
4 ft 7 in x
30 i
n
1.40 m x
0.77
m
Maximum load capacity
500 lbs
227 kg
Maximum wind speed, outdoors
28 mph
12.5 m/s
Maximum wind speed, indoors
0 mph
0 m/s
Wheelbase
3 ft 8 in
1.12 m
Turning radius (outside)
4 ft 6 i
n
1.37
m
Turning radius (inside)
0 in
0 cm
Ground clearance
2.8 in
7 cm
Ground clearance
Pothole
guards deployed
0.75 in
2 cm
Weight
1984 lbs
900 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source
2 Batteries, 12V 115AH
System voltage
24V
Maximum hydraulic pressure
(functions)
1800 psi
124 bar
Tire size
10 x 3 in
25 x 8 cm
Ambient operating temperature
Minimum
-20°F
-29°C
Maximum
120°F
49°C
Maximum slope rating, stowed position
25% (14°)
Maximum side slope rating, stowed
position
25% (14°)
Note: Slope
rating is subject to ground conditions with
one person in the platform and adequate traction.
Additional platform weight may reduce slope rating.
Maximum allowable
chassis inclination
Refer to "Tilt Sensor
Activation Settings" section
Drive speeds
Stowed, maximum
2.5 mph
4.0 km/h
Platform raised,
maximum
0.5 mph
40 ft/55 s
ec
0.8 km/h
12.2 m/55 s
ec
Floor loading information, GS
-1432m
Tire load maximum
937 lbs
425 kg
Tire contact pressure
143 psi
10 kg/cm
2
988 k
Pa
Occupied floor pressure
203 psf
1000 kg/m
2
9.73 k
Pa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.