Terex GS32MT-101 - Page 65

First Edition • Third Printing Operator's Manual
Specifications
Part No. 1308591GT GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite 63
Model
GS-
1932m
Height, working outdoor
21 ft 0 in
6.57 m
Height, platform outdoor
15 ft 0 in
4.57 m
Height, working indoor
24 ft 2 in
7.55 m
Height, platform indoor
18 ft 2 in
5.55 m
Height, stowed maximum, rails up
6 ft 5 in
1.97 m
Height, stowed maximum,
rails
folded
5 ft 2 in
1.58 m
Platform height, stowed maximum
2 ft 10 in
0.87 m
Height, guard rails
3 ft 7 i
n
1.10
m
Width
32 in
0.81 m
Length, stowed
4 ft 7 in
1.40 m
Length, platform extended
6 ft 7 in
2 m
Platform extension length
24 in
0.6 m
Platform dimensions (length x
width)
4 ft 7 in x
30
in
1.40 m x
0.77
m
Maximum load capacity
500 lbs
227 kg
Maximum wind speed, outdoors
28 mph
12.5 m/s
Maximum wind speed, indoors
0 mph
0 m/s
Wheelbase
3 ft 8 in
1.12 m
Turning radius (outside)
4 ft 6 in
1.37 m
Turning radius (inside)
0 in
0 cm
Ground clearance
2.8 in
7 cm
Ground clearance
Pothole guards deployed
0.75 in
2. cm
Weight
2600 lbs
1179 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source
2 Batteries, 12V 115AH
System voltage
24V
Maximum hydraulic pressure
(functions)
2400 psi
165.5 bar
Tire size
10 x 3 in
25 x 8 cm
Ambient operating temperature
Minimum
-20°F
-29°C
Maximum
120°F
49°C
Maximum slope rating, stowed position
25% (14°)
Maximum side slope rating, stowed
position
25% (14°)
Note: Slope rating is subject to ground conditions with
one person in the
platform and adequate traction.
Additional platform weight may reduce slope rating.
Maximum allowable
chassis inclination
Refer to "Tilt Sensor
Activation Settings" section
Drive speeds
Stowed, maximum
2.5 mph
4.0 km/h
Platform raised,
maximum
0.5 mph
40 ft/55 s
ec
0.8 km/h
12.2 m/55 s
ec
Floor loading information, GS
-1932m
Tire load maximum
1257 lbs
570 kg
Tire contact pressure
164 psi
10.13 kg/cm
2
1131
kPa
Occupied floor pressure
254 psf
1238 kg/m
2
12.16 k
Pa
Note: Floor loading
information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.