First Edition • Second Printing Operator's Manual
Work Area Safety
Part No. 1308591GT GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite 21
Battery Safety
Burn Hazards
Batteries contain acid.
Always wear protective
clothing and eye wear when
working with batteries.
Avoid spilling or contacting
battery acid. Neutralize
battery acid spills with baking
soda and water.
Do not expose the batteries or the charger to
water or rain during charging.
Explosion Hazards
Keep sparks, flames, and
lighted tobacco away from
batteries. Batteries emit
explosive gas.
The battery tray may remain
open during the entire
charging cycle.
Do not contact the battery
terminals or the cable
clamps with tools that may
cause sparks.
Component Damage Hazard
Do not use any battery charger greater than 24V
to charge the batteries.
Electrocution/Burn Hazards
Connect the battery charger to a
grounded, AC 3-wire electrical
outlet only.
Inspect daily for damaged cords,
cables and wires. Replace
damaged items before operating.
Avoid electrical shock from contact with battery
terminals. Remove all rings, watches and other
jewelry.
Tip-over Hazard
Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine stability.
Each battery must weight a minimum of
61 lbs/28 kg. Charger tray including batteries must
weigh a minimum of 108lbs/49kg, G-CON tray
including batteries must weigh a minimum of
105lbs/48kg
Lifting Hazard
Use the appropriate number of people and proper
lifting techniques when lifting batteries.
To Next Page
Loading...
Need help?
General
