First Edition • Third Printing Operator's Manual
Inspections
Part No. 1308591GT GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite 35
75 Press and hold the function enable switch on
the control handle.
76 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The machine should not move forward
or backward.
Press the drive function button.
78 Press and hold the function enable switch on
the control handle.
79 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue and yellow triangles on the control panel.
Result: The steer wheels should not turn left or
right.
80 Fully lower the platform.
81 Remove the 2x4 or similar piece of wood.
To Next Page
Loading...
