Operator's Manual First Edition • Third Printing
Operating Instructions
46 GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite Part No. 1308591GT
Tilt Sensor Activation Settings
Tilt Sensor Activation Settings
(side to side) 1.5°
Chassis Angle (front to back)
3°
If the tilt alarm sounds while
raising the platform, lower the
platform and move the machine to
a firm, level surface. If the tilt
alarm sounds when the platform is
raised, use extreme caution to
lower the platform.
When the platform controls LED
readout displays LL, the ground
controls LCD displays LL:
Machine Tilted, and the tilt alarm
sounds at 18
0 beeps per minute,
tions are
affected: drive, steer, and elevate
functions are disabled.
Return the machine to level ground to restore lift
functions.
Operation from Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Battery Level Indicator
Use the LED diagnostic readout to determine the
battery level.
Note: When a blinking LO code appears on the
platform controls LED display, the machine must
be taken out of service and charged, otherwise all
machine functions will be disabled.
To Next Page
Loading...
