Terex TL120 - Care and Maintenance

59
Operating Instructions Wheel Loader TL120
Care and Maintenance 7
7 Care and Maintenance
The good operating condition and life expectancy of
machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner’s interest
to perform the specified maintenance work and
comply with the service intervals. This Chapter deals
in detail with periodic maintenance, inspection and
lubricating tasks.
The type-specific maintenance and inspection plan
lists all work to be performed on the machine at
regular intervals. Maintenance and inspection plans
for this purpose are contained in every instruction
book.
It is essential that the recommendations in the
Chapter "Safety and Prevention of Accidents"
(Î 2, 13) are observed.
7.1 Intervals
First inspection First inspection once before first putting into operation Î 7.7.1, 64
Daily jobs Every 10 operating hours or every shift
1
Î 7.7.2, 66
Weekly jobs Weekly or after 50 operating hours
1
Î 7.7.2, 66
100 operating hours Once after first putting into operation
2
Î 7.7.4, 70
Every 500 operating hours After every 500 operating hours or 6 months Î 7.7.4, 70
Every 1000 operating hours After every 1000 operating hours or 12 months Î 7.7.4, 70
Every 2000 operating hours After every 2000 operating hours or after 2 years Î 7.7.4, 70
Table 22 Intervals
1
The first date to arrive always applies.
2
Also applicable if new or overhauled diesel engines are put into operation.