12
(10). : Manual data memory address number (1~99).
: The manual data memory full indication.
(11). ALARM : Alarm function on / off or alarm setting indication.
(12).
▲
: When the alarm function is on , this is the indication if
measured value exceeds the limit.
(13). : hh : mm : ss Time displayed.
: YY : MM : DD Date displayed.
(14). CAL : Calibration factor indication or setting indication (from
0.20 to 25.00).
(15). Z : Z axis measured value displayed.
(16). Y : Y axis measured value displayed.
(17). X : X axis measured value displayed.
XYZ : Triaxial measured value displayed.
(18). : Analog bargraph of each axis (X,Y or Z)
measured dynamic range indication for observing
trends.
(19). : Battery remained capacity displayed.
To Next Page
