23
4-6-3 Alarm function
Use this feature in the “Instantaneous”, “Max. instantaneous”
or “Max. average” modes.
When the measured value exceeds the limit value, a
sequence of warning beeps sounded.
4-7 Manual data memory storing individual measured values
The meter includes a non-volatile manual data memory
function which can store a maximum of 99 measured values.
4-7-1 Storing individual measured values
Value stored indication
Current memory location
(Starting with memory to location 01)
The current memory location number appears in the lower right
small display.
Once you press the ( ) key, it will store a displayed
value and plus “one” for the memory location number. Each
flash of the “ ” symbol display indicates one storage. The
memory location number shows “ ”, to indicate the manual
data memory is full, then you must clear the entire contents of
the manual data memory before you store any new values.
To Next Page
Loading...
Need help?
General
