16
4-4-4 Alarm limit value (ALARM)
The alarm limit value is used to monitor the display value
automatically. It controls the alarm indication function. The
alarm limit value can be edited in the displayed V/m unit.
※ Alarm limit function is only used for total three axial value
comparator.
4-5 Setting the meter
4-5-1 Setting the units of measurement
With the key as follows.
X
Y
Z Z
Y
X
2
X
Y
ZZ
Y
X
2
Units
(a)
(d)
(c)
(b)
Mannal data memory number
(a). Electric field strength (V/m).
(b). Computed magnetic field strength (mA/m).
(c). Computed power density (mW/m
2
).
(d). Computed power density (µW/cm
2
).
To Next Page
Loading...
Need help?
General
